Standard Products:
AMBO3-24
AMBO3-120
Ozone Flow Splitter Panel can be used with one or two larger ozone generators feeding several injection points! Rather than buying one ozone generator for each ozone injection point it is now possible to do more with less!
The Telchine Energy Technologies ambient ozone monitor has a bright 3.5” display and an intuitive user interface menu. A built-in 1 LPM sample pump provides continuous sample flow for reliable gas monitoring. A built-in 1-micron sample filter provides protection in harsh or dusty environments.
The gas flow is monitored internally so that users will be notified if the filter is clogged, missing, or if the pump has failed. Dual alarm setpoints with independent SPDT alarm output relays make system integration simple. An audible alarm horn and visual red strobe are installed to make alarm conditions evident.
The AMB_O3 also offers a 4‐20mA analog output for remote monitoring. There are two factory voltage options available: 24 VDC or 84‐240VAC 50/60Hz.
Sample inlet and exhaust are ¼” OD push-to-connect tubing fittings. Standard ozone sensor range is 0.0100 PPM to 0.300 PPM.
The AMB_O3 offers enormous savings in regards to required annual maintenance compared to competitive monitors in the market.
Once a year, the sample pump and ozone sensor must be changed. This process takes less than 5 minutes.
Destructs
Pressure Destructs
POD10. 0- 10 CFM
POD20. 0-20 CFM
POD10H. 0-10 CFM Heated/120V/240V
POD20H. 1-20 CFM Heated/120V/240V
VACUUM DESTRUCTS
VOD10. 0-10CFM. 120V/240V/480V
VOD20. 0-20CFM. 120V/240V/480V
VOD100 0-100 CFM. 120V/240V/480V
VOD200. 0-200 CFM. 120V/240V/480V
VOD350. 0-350 CFM. 120V/240V/480V
Destructs
Pressure Destructs
POD10. 0- 10 CFM
POD20. 0-20 CFM
POD10H. 0-10 CFM Heated/120V/240V
POD20H. 1-20 CFM Heated/120V/240V
VACUUM DESTRUCTS
VOD10. 0-10CFM. 120V/240V/480V
VOD20. 0-20CFM. 120V/240V/480V
VOD100 0-100 CFM. 120V/240V/480V
VOD200. 0-200 CFM. 120V/240V/480V
VOD350. 0-350 CFM. 120V/240V/480V
Our ozone destruct catalyst heater was designed to provide years of reliable service, a higher standard than the industry expectations. Our 120VAC 200W insertion style heater is designed for use on small pressurized ozone destructs. It has a 3/8” O.D. X 4”L probe with 1/4” MPT threaded connection on the collar. We do offer the heater with a flexible wire lead to the heating element and a separate “heater well” if your application requires it. The temperature set point is adjustable from 0 to 800degF.
Degassing Valve Assembly with CPVC Asahi isolation valve. Completely assembled and shipped right to your door.
Standard Product:
FS250 low flow unit 0-35 SCFH
FS375 high flow unit 0-80 SCFH
Ozone Flow Splitter Panel can be used with one or two larger ozone generators feeding several injection points! Rather than buying one ozone generator for each ozone injection point it is now possible to do more with less!
Standard Product:
FS250 low flow unit 0-35 SCFH
FS375 high flow unit 0-80 SCFH
Ozone Flow Splitter Panel can be used with one or two larger ozone generators feeding several injection points! Rather than buying one ozone generator for each ozone injection point it is now possible to do more with less!
Ozone Flow Splitter Panel can be used with one or two larger ozone generators feeding several injection points! Rather than buying one ozone generator for each ozone injection point it is now possible to do more with less!
Tech Specs and Features:
- 24 V DC Power
- Withstand 110 PSI
- 1/4 inch FPT fittings or 1/4 push to connect tubing fittings
- 4A SPDT Alarm Relay
- Red/Blue flashing lights to indicate fault
- Green/Blue to indicate dew point is appropriate
Telchine's DewPoint Switch has the latest specialized technology installed so that it automatically senses and tells you when the dew point of the oxygen or air being fed into the ozone generator is not meeting set points, which is typically greater than -69.9 degrees Fahrenheit. You can wire this into your ozone generator interlock to prevent damage and nitric acid formation due to high humidity feed gas.